<ul> <li>Perfect Compatibility: CryoGrip Pro Glacier Build plate is suitable for 3D printers with a platform size of 257x257mm, for Bambu-Lab P1S, P1P, X1C, X1E, A1. Compatible with PLA(45-55℃), PETG(60-75℃), ABS, PA and other filament. (NOTE: Glacier printing adhesion not as good as Frostbite with PLA and PETG)</li> <li>Hollow Out Handle Design: The CryoGrip Pro Glacier Build plate only heats up slightly in the hot bed at 100℃, protecting your hands. After printing is completed, the build plate can be immediately removed and replaced with a new one to continue printing, without waiting for the build plate to cool down before taking it out</li> <li>Unparalleled Adhesion: CryoGrip Pro Glacier Build plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Enjoy perfect printing effect without warping</li> <li>Special Material Texture Printing: CryoGrip Pro Glacier Build plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The build plate have Impact resistant, Corrosion Resistant, Long life span, zero risk of repeated bending causing coating to peel off. The surface texture is delicate, making the bottom of the printed part smoother</li> <li>Own AR Code: The intricate markings compatible with X1 buildplate locating scan, help verify buildplate type. No need to worry about missing QR code error. Aslo you can choose your own AR code, no worry error codes when printing High-Temp material with CoolPlate code</li> </ul>

• ☑Exceptional Toughness--PETG filament 1.75mm combines the advantages of both PLA and ABS 3D printer filament. Enjoy excellent impact resistance, acid and alkali resistance, weather resistance, and superior adhesion with our PETG filament.Easily print shatterproof designs and prototypes.
• ☑High Transparency and Gloss--PETG filament choose durable and strong material that delivers excellent clarity, light transmission, and a glossy finish adding a professional touch to your finished prints.
• ☑Bright And Vibrant Colors--The 3D printer filament PETG boasts bright and vibrant colors, Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
• ☑Low Shrinkage--With a low shrinkage rate,TECBEARS PETG filament delivers superior dimensional stability and minimizes the risk of cracking or warping during printing.
• ☑Leading production process--Neatly lined up filament can avoid filament tangling, twisting or breaking during the printing process, reducing the risk of clogging and greatly increasing the printing success.

• 【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
• 【High Dimensional Accuracy】The winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of +/-0.02mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
• 【No Clogging, No bubbles】Without any clogging or bubbles, Anycubic PLA Plus Filament ensures a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
• 【 Without Tangle Hassles】Anycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
• 【High Compatibility】Ensuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.

• 【RFID Filament Enhanced Smart Printing】The Anycubic Color Engine Pro precisely detects RFID filaments, automatically optimizing printer settings for the best results. No more tedious and complicated setup adjustments, ensures precise execution of every print job and minimizes filament wastage. Just load the filaments and start printing. This feature is only applicable to the Anycubic Kobra 3 Combo 3D Printer.
• 【Accuracy & Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
• 【Neat Spool & Premium Quality】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
• 【Clog-Free & Bubble-Free】 Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
• 【For Most 3D Printers】The Anycubic Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market.

• Silky Metallic Finish & Vibrant Colors: Achieve stunning silk-like shine & rich hues for eye-catching decorative prints, miniatures, or gifts. Low layer lines for smoother surfaces
• Easy to Print:FilaBees 3D printing filament silk pla works flawlessly with most FDM printers . Low warping & great adhesion—perfect for large or intricate designs
• Show Aesthetics: Elevate models with pearl-like luster! Ideal for figurines, lamps, jewelry prototypes, or displays where visual appeal matters most
• Beginner-Friendly & Reliable:Non-tangle PLA formula, odor-free & warp-resistant. Optimized for hassle-free printing—just load and create! Sealed packaging keeps filament fresh
• No Post-Processing Needed: Prints come out glossy & smooth—skip sanding/painting! Great for cosplay props, gifts, or décor. Not for heavy-duty use

<ul> <li>【Fire Rated】With FCC and UL263 high standard certification, our gimbal recessed lighting is 2-hour fire resistant to stop the spread of fire, prevent you from a potential accident, and keep your family safe.</li> <li>【360° & 90° Rotatable】This adjustable recessed lighting can rorate40°/ 360° left and right, 90° up and down. The lighting Angle and position can be flexibly adjusted according to needs. Ideal for directional lighting and highlighting artwork/murals.</li> <li>【5CCT & CRI90+】2700K, 3000K, 3500K, 4000K and 5000K dimmable, 90+CRI technology brings higher brightness and color quality to your house to meet the demand of any mood or decor.</li> <li>【Widely Applicable】Fire Rated recessed lights are suitable for residential, commercial, hospitality, education, healthcare, office, and industrial settings.</li> <li>【Trustworthiness】All materials are fire-tested. These slim LED lights are thermally protected, providing a worry-free lighting solution for your home or office. And our customer support team will response to your cases within 24 hours.</li> </ul>

<ul> <li>Large, comfortable handles take the pain out of opening cans. Smoothly cuts the circumference of cylindrical cans of soup, canned vegetables, fruit, and more</li> <li>Features big cushioned handles for a non slip grip, soft rubber-coated handles</li> <li>The oversized knob turns easily to take the hard work out of opening cans. Includes a built-in bottle opener</li> <li>The sharp cutting wheel is made of sturdy stainless steel - Durable heat-treated, zinc-coated stainless steel cutting blade</li> <li>Hand Wash only - Hand wash with warm water and mild detergent. Rinse and dry immediately</li> </ul>